SignTorch
Artist
white is same as your other post - the teeth will be yellow or a hole without a white back layer
I'm on the fence how to lay this out - with only two layers yellow has to go on top which will be thin outline around the letters and the separate yellow parts will be 3 pieces or slightly modified to bridge them together
if you can go with more layers I think it would look good - it will add some nice depth - and be easier to assemble - except the white will be puzzle pieces on the same layer as purple and then you won't need a white back layer
I'm on the fence how to lay this out - with only two layers yellow has to go on top which will be thin outline around the letters and the separate yellow parts will be 3 pieces or slightly modified to bridge them together
if you can go with more layers I think it would look good - it will add some nice depth - and be easier to assemble - except the white will be puzzle pieces on the same layer as purple and then you won't need a white back layer
SignTorch
Artist
perfect - I can do layers good but its a head scratcher to figure them out beforehand
- Login or Sign Up - to See More Content -
Post a photo of the finished cut and get a point for a discount on a future request.
SignTorch
Artist
ok - I did the white as puzzle pieces to fill the space between layers - so an extra layer for white is not necessary but there is a visible seam on the back - if we add a white back layer to cover that seam then we can also eliminate the white puzzle pieces but then the white will be more than one layer behind the higher layers
I'm still curious how you are attaching the layers together - I assume glue - for tape you might need more overlap on some of the parts - for other methods you might need something else different
I'm still curious how you are attaching the layers together - I assume glue - for tape you might need more overlap on some of the parts - for other methods you might need something else different
