Ready To Cut CNC Art

Garrett Farm Scenery

Tractor Tractor
0 Reply to thread
RusticOak

RusticOak

member
Hello! Could I get a price for this project?

Customer wants it to be approximately 3 feet by 2 feet. Keep the last name 'GARRETT' and omit the 'DEAN A.' and dates.
My first thoughts were to put it in an oval frame but I'm open to suggestions.

This would be cut with a plasma table.

Thank you!

Garrett Farm Scenery.jpg
 
I usually charge $25 flat rate

that design won't hardly work at that size - the cattle would only be 1" tall

would have to totally rearrange it - to look good - like have tree barn cattle kids across the middle - sky across top - water along bottom

oval takes away corner space - that space would be useful for bigger foreground and background detail

to keep everything near to that arrangement it would have to be a very basic line drawing with much less detail

Untitled-2.jpg
 
well, at 48" wide the cows are still less than 1.5" tall and the fence is 3/4" tall

that would help a little bit - then it would still have to be simplified a lot

the smaller it is the less it will look exactly like the picture due to plasma's kerf width and required line spacing

so it can have the same arrangement just not the same clarity
 
I got the approval from the customer to go 48" or a little bigger. Whatever shape would work best. I did get a better picture of the overall scene.
E6CB0A3D-D911-4E27-8F9C-F36D85B92AE9.jpeg
 
Looks great! Can you add the stick sticking out of the pond? It's underneath the cow on the far right in the pond. Thank you!
 
You must log in or register to reply here.
Tractor Tractor
Back
Top Bottom